304 carby manifold

[Rustyhq]

Anybody have a 4 barrell carby manifold to suit efi heads for sale

[Taily]

If you want a manifold that actually works (not like those cheap ebay 'specials' that will need constant attention to fix gasket leaks/porous etc...) ring Harrop Engineering directly: 03 9474 0900. You can order directly from them.

They pour them in batches so you may need to wait a couple of weeks but you might strike it lucky and they'll have a dual plane on the shelf. I haven't bought one from them in over 12 months but I've never had any QC issues with their stuff.

[JDT]

I've got a brand new dual plane Torque Power manifold that I'd sell. It's never been used. I made the mistake of buying 2 at the same time because I had intentions of building two identical engines. Things didn't go to plan. I ended up with way more horsepower in the second engine. The guy from Torque power is very knowledgeable. My first engine did exactly as he said it would. I've gone for a dual plane high rise manifold for the second engine, 750 Ultra HP Holley and MSD ignition.

[Valencia]

I've got a brand new dual plane Torque Power manifold that I'd sell. It's never been used. I made the mistake of buying 2 at the same time because I had intentions of building two identical engines. Things didn't go to plan. I ended up with way more horsepower in the second engine. The guy from Torque power is very knowledgeable. My first engine did exactly as he said it would. I've gone for a single plane high rise manifold for the second engine, 750 Ultra HP Holley and MSD ignition.

Do you need a bonnet scoop with that manifold JDT in a HZ

[JDT]

I'm hoping I don't have to. I haven't fitted the engine yet. The ultra HP allows me to run an air cleaner base that has a huge offset. Going by the clearance the WB has I should be ok.

[JDT]

Sorry I must of been in the sun to long today. I've gone for a High rise dual plane manifold. Not a single plane. The height difference shouldn't be an issue. It's overall height is only 6 inches.

[Rustyhq]

How much you after mate