Page 8 of 8 FirstFirst ... 678
Results 71 to 76 of 76

Thread: electrical help - fan, horn, blinkers, temp

  1. #71
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630
    Got there... but it took too long


    Washer - Corroded terminal and pump stuffed
    Horn - can hear relay clicking when horn depressed - Horn replaced
    Reverse lights - this was bullshit! The slop in the shifter is causing havoc with the rev light switch
    Heater fan - had no idea WB had a fan relay. Fuse/relay was blown/melted
    temp gauge - sender stuffed
    oil switch - switch was stuffed
    handbrake warning on dash- dummy light cluster was stuffed - very tricky considering some of the lights on the cluster worked

    so I'd convinced myself that 7-8 items that were stuffed had to have a common link. i was wrong. it's was just your typical neglected bucket of shit work ute!

    i've learnt a heap and have no regrets as i can only dream I would've paid a auto sparky telephone numbers to fix them all. thanks to all that gave me pointers!
    BQZ

  2. #72
    It's a rockin' Big Rob's Avatar
    Join Date
    Aug 2013
    Location
    Eurobodalla NSW South Coast
    Posts
    1,829
    Fantastic! I told you you'd get it. You now have so much knowledge about YOUR electrical system.

    Experience like this will help you so much in the future.
    Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!

  3. #73
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Good. Electrics are fun....
    It's always a bonus when you work stuff out that's for sure.

  4. #74
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    Quote Originally Posted by Vombil View Post
    Got there... but it took too long


    Washer - Corroded terminal and pump stuffed
    Horn - can hear relay clicking when horn depressed - Horn replaced
    Reverse lights - this was bullshit! The slop in the shifter is causing havoc with the rev light switch
    Heater fan - had no idea WB had a fan relay. Fuse/relay was blown/melted
    temp gauge - sender stuffed
    oil switch - switch was stuffed
    handbrake warning on dash- dummy light cluster was stuffed - very tricky considering some of the lights on the cluster worked

    so I'd convinced myself that 7-8 items that were stuffed had to have a common link. i was wrong. it's was just your typical neglected bucket of shit work ute!

    i've learnt a heap and have no regrets as i can only dream I would've paid a auto sparky telephone numbers to fix them all. thanks to all that gave me pointers!
    Great work. Did you end up using a test light to do this?
    BO6 = Rarer then a Sandman

  5. #75
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630
    Don't tell WB but no, I didn't use a test light.
    BQZ

  6. #76
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Quote Originally Posted by Vombil View Post
    Don't tell WB but no, I didn't use a test light.
    All good mate. You can do it anyway you like. You got the result. Plus you are an expert on voltages now.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •