Authentication needed

[Sammyb]

Adr number matches chassis and 2 seats

[Wombat7051]

well, in my humble opinion, that leaves some possibilities.
1. Tags and chassis from a ute used to make a van
2. Brisbane built so xx7 on the tag, but you say 1950gvm
GVW for HZ

2000kg - V8 Panel van
1860kg - V8 or 6cyl for Ute
So GVM is out, could be a group of mistakes, might really be a Monday car.
The other thing, and someone may be able to help me out here, in the skinny tag, R = 253, H = 78, H4= Brisbane. If it is a 9/77 should it be G rather than H for the year?

[Duc1991]

well, in my humble opinion, that leaves some possibilities.
1. Tags and chassis from a ute used to make a van
2. Brisbane built so xx7 on the tag, but you say 1950gvm
GVW for HZ

2000kg - V8 Panel van
1860kg - V8 or 6cyl for Ute
So GVM is out, could be a group of mistakes, might really be a Monday car.
The other thing, and someone may be able to help me out here, in the skinny tag, R = 253, H = 78, H4= Brisbane. If it is a 9/77 should it be G rather than H for the year?

Wombat
I thought 1950 kg for early HZ was right. There is a thread here somewhere about it.

[Valencia]

Wombat
I thought 1950 kg for early HZ was right. There is a thread here somewhere about it.

Correct mine is

[Wombat7051]

http://www.mysandman.com.au/forums/s...7395#post97395

I was wrong, found the thread above tells all.

Still what Sammyb has is strange

[Dick61]

http://www.mysandman.com.au/forums/s...7395#post97395

I was wrong, found the thread above tells all.

Still what Sammyb has is strange

I wouldn't take that thread as gospel, I had an HX XU4 Kingswood V8 ute and it's GVM was 1860.
100_4719.JPG100_4720.JPG100_4721.JPG