Persian Sand Met. XX7

**Max_Van** · 21-09-2010, 10:03 PM

LPG - Going back to 2 barrel
Rocker covers - Should be rocket red?
fan guard is suit A/C cars. - Have the bent steel one to go on it.
No brake warning sticker ah no! haha....I know soeone who can sell me one

Extractors - Got some HJ ones here to go on
being HJ the brake booster should be a big nut? - Not sure? Any other to confirm
wiper motor I think is a HZ type? - again, don't know
Rear sway bar is incorrect for hj - Should it not have one?
spacer bushes on power steer are non original by the looks. - Will investigate further
cable clutch is non original for HJ - It has a supra 5 speed in it :(

**samin8r** · 21-09-2010, 10:17 PM

I have an original HJ Premier and it doesnt have the big nut brake booster? Not sure if belmont's were different?

**Max_Van** · 21-09-2010, 10:19 PM

Thanks mate

The plot thickens :shifty:

Should it have rat trap clutch for HJ?

I assume it should have the short spacers and the lower pulley is incorrect?

How's the engineering on the spare wheel holder. Is the lower retainer the correct one for the gts rim's?

**Blocker** · 21-09-2010, 10:51 PM

Rat Trap for HK to HZ. I'll scan the pages from my HJ catalog for you if you want?

**AN5590** · 21-09-2010, 11:12 PM

Originally Posted by Max_Van

How's the engineering on the spare wheel holder. Is the lower retainer the correct one for the gts rim's?

It looks like a standard lower retainer for the spare wheel - not the GTS rim version - checkout pic's in Oz's Workshop threads - http://www.mysandman.com.au/forums/s...el-winch/page3

**Max_Van** · 21-09-2010, 11:17 PM

Would be great if you could Blocker

Looks like my retainer has been modified with fatter ends?

**the ski man** · 21-09-2010, 11:25 PM

to my knowledge the rear sway bar was part of the RTS package fitted to HZ as part of the model changes, so if it is a HJ then it shouldnt have one, no.

regarding the clutch, i thought they were all cable??? anyone able to send me a good link on what this means? google wasnt too helpful

**stickthis** · 22-09-2010, 06:13 AM

Originally Posted by the ski man

to my knowledge the rear sway bar was part of the RTS package fitted to HZ as part of the model changes, so if it is a HJ then it shouldnt have one, no.

regarding the clutch, i thought they were all cable??? anyone able to send me a good link on what this means? google wasnt too helpful

Rear swaybars where part of the RTS package yes. The diff had mounts welded on not u bolts also ;)

Clutch. Rat trap was used in HJ. Half cable/half mechanical started in HX sometime I think? HZ had full cable clutch. hmmm hoping I got that close.

Spacer bushes on the steer pump dont look to be thick enough. Being picky I know. Originals where about 7/8 in dia. Where as those look to be 3/4 at the most. Or 1/2 pipe maybe. Maybe they are just too long making them look smaller? Will have to measure some for you.

Bottom pully on motor. Aslong as its a 2 V and hasnt got the extra 1 V bolted onto it its correct. The extra front V was used for the A/C.