Quote Originally Posted by damienengland View Post
Wow Hainzy, looks good. Where did you get the adaptor ring from? Also, is that a large square plate you have welded in as well? Whats the purpose for needing the wider plate?

Cheers
Cheers mate.

I got the adapter plate with all the connections from these guys

https://www.efihardware.com/products...onversion-Kits

I think it was about $120 from memory. I bought the MRA from a wrecker. I dont have the car going yet so I have my fingers crossed that it works...

The large square plate was welded on because there was a ridge across the top of the tank which meant that the ring couldnt be cleanly welded on. See the ridge on the other side of the tank and youll see what I mean. It was easier to cut a section out and weld the ring to that.

Also the direction I have the hoses pointed is the way you need to do it. I originally did it on a bit of an angle (see the photo below), and I found that when the tank was bolted up into place, the hoses and connections got squashed into a support/bracing part under the floor. I had to take the whole tank out and redo it. Considering how many pieces of hose and metal were being juggled to get the tank into place, there was very few LOLs at that time and a large amount of swearing!!

How not to do it...