Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Factory auto shifters

  1. #1
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095

    Factory auto shifters

    Gday guys couple of questions
    1- Are the factory turbo 400 and 350 the same shifters as in the brackets that bolt to the tunnel
    2- If not can they be interchanged between gearboxes
    any info would be great
    cheers G.

  2. #2
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Someone must know surely

  3. #3
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Ozbox would have known but he has left the site sadly.

  4. #4
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    I will try and get hold of Byron he will tell me

  5. #5
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630
    i'd bet my left nut the shifters are the same. not sure about brackets.
    BQZ

  6. #6
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Someone has told me the turbo 400 bracket is longer than the 350 one ??

  7. #7
    same shifters ive swapped t350 to t400 over the past just different tailshaft and gearbox cross member all pretty basic converstion

  8. #8
    Cruiser jason.ruff's Avatar
    Join Date
    Jun 2012
    Location
    Darwin
    Posts
    416
    Look I'm not 100% but T400 is shifted by rods and T350 is shifted by cable. Cannot guarantee this, But trimatic to T350 is definitely different. Im trying to change trimatic shifter to T350 at the moment.

  9. #9
    Cruiser
    Join Date
    Sep 2013
    Location
    Eastwood, NSW
    Posts
    366
    Hi Guys.

    The shifter thing is a good question, because there are several types.

    Firstly, to my knowledge the cable version mentioned was only seen in HX onwards Statesmans with either TH400 or TH350. All 'regular' Holdens used rod shifters.

    Also AFAIK, the TH400 shifters & the TH350 shifters are interchangeable in both versions & the lever is always on the left-hand side of the box.

    The Tri-Matic floor shifter was always rod only & connected to the transmission on the right-hand side.

    With a bit of fiddling the Tri-Matic shifter can converted to work on a TH400/350, I've done it many times.

    Dr Terry

  10. #10
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Thanks Dr Terry great info as usual

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •