Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: 1 tonner diff

  1. #1
    Leadfoot Spike's Avatar
    Join Date
    Oct 2014
    Location
    Perth
    Posts
    181

    1 tonner diff

    It would appear that some knob has built my HX van with a 1 tonner diff mated to a std V8 drive shaft. My question is can I simply install a 1 tonner drive shaft behind an M20 gearbox? or is there an 'adaptor' universal joint I could install
    cheers

  2. #2
    Cruiser jason.ruff's Avatar
    Join Date
    Jun 2012
    Location
    Darwin
    Posts
    416
    I'm sure I have seen them on eBay. They do exist.
    Kings wood country has them.
    Last edited by jason.ruff; 04-11-2016 at 03:24 AM.

  3. #3
    ive bought them in the past its a uni joint that has the 2 different sized cups i can dig up the part number if you have no luck elsewhere

  4. #4
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    One tonner shaft is a bit longer I think. Pretty sure there are 3 different sizes.
    Sedan Coupe
    Wagon Statesman Ute Van
    1 tonner.

  5. #5
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    There a fair few different ones. Turbo 400 are shorter etc.

  6. #6
    It's a rockin' Sandaro's Avatar
    Join Date
    Jul 2011
    Location
    Picton NSW
    Posts
    1,122
    I believe repco sell an adaptor uni with the different sizes up and across. tonner tailshaft is longer

  7. #7
    Leadfoot rallyvan's Avatar
    Join Date
    Nov 2010
    Location
    Western Sydney
    Posts
    181
    I have a one tonner diff fitted in my van and it uses an adpter uni joint.

    Hardy Spicer Part # RUJ-2034

    Have a look at page 7 on this link.

    http://www.hardyspicer.com.au/PDF_Fi...hanics%20R.pdf


    Hope that helps

  8. #8
    Sandman Driver ambientgoat's Avatar
    Join Date
    Mar 2010
    Posts
    516
    +1 for tonner diff and adapter uni joint here.

  9. #9
    Leadfoot Spike's Avatar
    Join Date
    Oct 2014
    Location
    Perth
    Posts
    181
    Thanks guys, that has made the job a lot easier, cheers

  10. #10
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630
    i have a 3.08 tonner diff and there is in and out slop in the axles. anyone know what causes this?
    BQZ

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •