axles are no issue...still fits...
yoke will take a larger universal joint if it is indeed a 1 tonner diff..you will need a step down universal which goes from the 29ml 1 tonner yoke to the smaller v8 universals on the tailshaft.repco sells these for around $60 bucks depending where you shop....you will also need the u bolts for the pinnion of the 1 tonner diff..easiest way to id these is they have 1/2 inch nuts instead of 7/16th nuts..
you could also change the yokes but i suggest you dont unless you know someone real good with diffs..

--- Updated ---

Quote Originally Posted by abncraig View Post
I just got a diff centre for my salisbury it's 3.08 I am told it's out of a tonner, after some research I have found out they have different size axles and yokes can anyone confirm this for me?
just to confirm somethin here...you got a complete diff axle to axle or you got a centre which would just be gears?:knockout: