Got most of the body parts assembled and decided to get stuck into the electrical. I always found the stop light weren't up to scratch from factory especially when in direct sunlight. Don't want any dick heads running up the back of me so decided to fit twin stop light globes per side. I had no globe holders due to the WB/HZ swap so it was the perfect time to do the mod.

I will also have to fit a couple of diodes in the rear blinker feed wires to stop the feed back from the reverse lights circuit when in operation. WBs had different rear wiring circuits to HZ.

DSC_0087[3227].JPGDSC_0088[3228].JPGDSC_0089[3229].JPG

I also have to reconfigure the wiring for the twin headlight front and add an extra relay, the high beam inners are 100w each and a bit to much load on the original switching gear.


DSC_0092[3232].JPGDSC_0091[3231].JPG

It took a few hours cleaning up the engine bay after it come back full of dust and overspray from the painters.

DSC_0093[3233].JPG

Just waiting on some trim to turn up so I can get the headlining in before fitting the front screen.