Hz Sandman ???

[Maysik]

I'm assuming it's the door frame gutter. It doesn't have a moulding.

I think I remember this door frame gutter being discussed about 4-5 years ago. Wasn't there two types, a short and a long one, or wider or something?

[juzanobody]

As inners & Valencia said, I'm chasing a good pair if anyone has some?

9E81F4D3-ED1C-4DE3-8111-46BF06181A0A.jpeg80662E3E-CA71-453A-A299-3718A7638E8F.jpeg

[Absinth]

I think I remember this door frame gutter being discussed about 4-5 years ago. Wasn't there two types, a short and a long one, or wider or something?

The long ones as pictured above were on HQ and HJ, the short ones along the top of the door only were HX onwards.

[Innuendo]

They was even a change in styles on HQ. Same for windscreen moulds.
From memory one type was spot welded and others screwed on. I'll have to check what mine has...

[Maysik]

I've never actually seen those angle bits before, only the door gutter top bit that's on my van.
My van is an HJ Kingswood and mine only has the door gutter top bit that is screwed up. The only thing that is screwed on my pillar is the windscreen stainless.

I did have a ute that had the top door gutter with a stainless strip on it. I took that strip off and put it on mine, it is about an inch short one end, (windscreen).

[Maysik]

DSC02817.JPG]

[waddell65]

Thanks guys, great help.
Mine is a HZ van, so I would need the short type (according to info in this thread).
I have tried Pete up in Middle Swan, doesn't appear to have any.

Does anyone out there in the van world have a spare set I could purchase from you ?

[waddell65]

Thanks guys, great help.
Mine is a HZ van, so I would need the short type (according to info in this thread).
I have tried Pete up in Middle Swan, doesn't appear to have any.

Does anyone out there in the van world have a spare set I could purchase from you ?

[Absinth]

I've never actually seen those angle bits before, only the door gutter top bit that's on my van.
My van is an HJ Kingswood and mine only has the door gutter top bit that is screwed up. The only thing that is screwed on my pillar is the windscreen stainless.

I did have a ute that had the top door gutter with a stainless strip on it. I took that strip off and put it on mine, it is about an inch short one end, (windscreen).

Been swapped out at some stage in its life, HJ should have the long ones extending down the pillar and screwed to it. Are there screw holes in the pillar under the chrome trim or has someone bogged or welded them up?

- - - Updated - - -

Thanks guys, great help.
Mine is a HZ van, so I would need the short type (according to info in this thread).

Does anyone out there in the van world have a spare set I could purchase from you ?

Try Greg at Classic Oz Wreck, he should have some floating around.

[juzanobody]

Maysik, mine is a HJ 6/75 Sandman & these are the bottom screw holes Absinth mentions & some of my xx7 genuine rust! ��

DFB71B53-4D65-4480-90CD-EE80408B106C.jpeg C6FED344-3FDA-4F9B-AE77-978ADFA545D0.jpeg