Couple of questions on HJ Sandmans.

**agr071** · 08-04-2010, 09:54 PM

Cool!!
Now to look for one of them. :D

**wbute** · 08-04-2010, 10:10 PM

Make sure you get the whole set up out of a kingswood or early statesman. I got mine out of a wb statesman to put in my wb ute and everything was the same except the cable that goes from the controller to the flap on the heater box(this directs the air over the heater core for warm air). The cable operated the reverse way to the ute and I had to connect it to the vent control on the dash which isnt real good. Also the lower dash facia is different in that it had the air vent cable slots deleted. Not many people would notice though.

**sandman44** · 09-04-2010, 12:54 AM

The HJ Sandman I had was a 76 XX7 and had black dash fascia and gts gaurds with Blackouts. I was the 3rd owner all the interior was standard and un touched from front to back and original, but it was is primer when I bought so not sure about the blackouts.

**agr071** · 26-04-2010, 08:17 PM

As my HJ had no dash at all i have nothing to go on other then memory of my HJ Stato 20 years ago, was there ever intermittant wipers on HJ's?
If so where was the switch?

**hjsandman** · 26-04-2010, 08:58 PM

Originally Posted by agr071

As my HJ had no dash at all i have nothing to go on other then memory of my HJ Stato 20 years ago, was there ever intermittant wipers on HJ's?
If so where was the switch?

Hi Agro

My HJ has no intermittant wipers at all. I know the previous owners and this is the original dash.I had a look my HJ owners Manual and it did'nt show an intermittant wiper on the GTS Dash , Comercial/Belmont/Kingswood Dash or Premier/Monaro LS Dash.
It does however show a Dwell Control for wipers on page 37.(It is a round dial in the wiper control.)
So I think it may have been an option.
Hope this helps.
Rob.

**agr071** · 27-04-2010, 07:28 AM

Yep. that helps a lot Rob.
Thanks heaps :D

**agr071** · 01-05-2010, 03:02 PM

Sorry to be a pain but was the front spoiler an option on HJ?

**Devils Grip** · 01-05-2010, 11:10 PM

Originally Posted by agr071

Cool!!
Now to look for one of them. :D

hey agro when you find the old skool a/c, compressor, i have some old skool gas to go into it, but only 9kg of it: so check for leaks.:twisted:D

**stickthis** · 02-05-2010, 11:20 AM

Originally Posted by Devils Grip

hey agro when you find the old skool a/c, compressor, i have some old skool gas to go into it, but only 9kg of it: so check for leaks.:twisted:D

ah do you really! Ive been asking around for ages for some! I want some for my HZ GTS when I finish it. As I do not want to run an aftermarket compressor. I have wondered about fitting the outer cover to a newer smaller unit. Just machine it all out and fit it overtop.....

**agr071** · 02-05-2010, 12:29 PM

You don't have to run an aftermarket compressor.
Just drain the compressor of it's oil, put in some PAG oil (available for auto electrical wholesalers), put some R134a adaptors onto the charge ports, and presto you can regas on R134a.
My HZ has been changed with no hassles at all.