Aftermarket A/C

[Puzzigully]

Bits have started to arrive

First was the "adaptor kit" to mount the Sanden compressor
(If you recall last post, I determined the factory mounting plate had mounting holes incorrectly spaced for a Sanden)
You still need the factory Cast piece for A/C & Alternator mounting
IMG_7324.jpgInstructions
IMG_7326.jpgKit Contents
IMG_7327.jpgComparison to factory mount - note the adaptor only picks up on two lugs, not three as per original.

IMG_7328.jpgCompressor (in box)
IMG_7336.jpgCompressor out of box - advice is the 7 chamber pump is better than the 5...time will tell

IMG_7338.jpgCondenser - need to fabricate up a mount.

IMG_7329.jpgControl unit
IMG_8039.jpgLooks like this when fitted

IMG_7330.jpgDrier(?)

IMG_7331.jpgBulkhead fittings (one for A/C, one for Water - can get in a line of 4 or square of 4 - I chose this way)

IMG_7332.jpgBlanking plate - even pre drilled - pleasant surprise!