Results 1 to 10 of 21

Thread: Aftermarket Airconditioning Installation Thread

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 19-07-2018, 09:38 AM #16
    Puzzigully
    Puzzigully is offline
    P Plater
    Join Date
    Jun 2018
    Posts
    88
    Damo,

    Thanks for the tip.

    I have a guy helping me who claims to be an "expert", so I'll quiz him on that.


    Tried to dummy up the Sanden compressor with the Factory compressor mounting plate.

    The Sanden compressor has mounting holes in a square with centres 103mm apart. The holes are approx 10mm in diameter
    The Factory mounting plate has mounting holes (also in a square - although only three) with centres 107.5mm apart. The holes are approx 8mm in diameter.
    (N.B. These may not be 100% accurate, but will be within +/- 1mm, as i used a tape measure)

    So it's not a "bolt on".

    I have ordered the adaptor kit, so will see how that looks.

    In a pinch, I could slot the holes in the mounting plate with just enough meat left to be ok - but I'll wait for the aftermarket plate.
    Last edited by Puzzigully; 19-07-2018 at 10:10 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules