Lowering WB Panel Van

[damienengland]

I've got Pedders 2084 Sportsryder springs in both my WB panel van and tonner. I think they are a 2 inch lower spring (?) but i'm happy with them. One thing i did find with the height was that my tonner tended to scrape the front tyres (standard WB stato rims) on full lock when reversing, but i then put on alloy replica GTS rims from Canterbury Wheels (15x7 and 15x8) and have never had the scraping issue since.

Tonner pic for height reference
Tonner Height.JPG

[wbute]

I've got Pedders 2084 Sportsryder springs in both my WB panel van and tonner. I think they are a 2 inch lower spring (?) but i'm happy with them. One thing i did find with the height was that my tonner tended to scrape the front tyres (standard WB stato rims) on full lock when reversing, but i then put on alloy replica GTS rims from Canterbury Wheels (15x7 and 15x8) and have never had the scraping issue since.

Tonner pic for height reference
Tonner Height.JPG

Which makes you think they would have scraped at full lock even with standard springs and some load on the springs. The wheel isn’t moving through any different areas with the lower spring and they were Holden wheels.