Results 1 to 6 of 6

Thread: 5lt with factory AC in a HQ

  1. #1
    Learner Driver outlaw67's Avatar
    Join Date
    May 2015
    Location
    Canberra
    Posts
    16

    5lt with factory AC in a HQ

    I have a HQ set up with a 304 out of a VR , Iím am installing factory air but need to know who else has added the compressor and mounting brackets and maybe some tips on install .
    Thanks

  2. #2
    It's a rockin' Sandaro's Avatar
    Join Date
    Jul 2011
    Location
    Picton NSW
    Posts
    1,086
    Do you have all the brackets, pulleys and bits and pieces? Or is that the bit you need tips on?

  3. #3
    Learner Driver outlaw67's Avatar
    Join Date
    May 2015
    Location
    Canberra
    Posts
    16
    I have 304 running in the chassis , i have the three row bottom pulley installed and a power steering unit , I picked up a VN steal compressor bracket which fits correctly but pulls the powersteer pump out of alignment the thickness of the bracket , I just need to know what compressor will fit and if I need to change the power steer pump or if I can move the pulley back on the shaft ?
    Last edited by outlaw67; 08-04-2019 at 03:02 PM.

  4. #4
    It's a rockin' Sandaro's Avatar
    Join Date
    Jul 2011
    Location
    Picton NSW
    Posts
    1,086
    http://www.mysandman.com.au/forums/s...-Woohoo/page23

    Not sure if it will help you, but Damo had some issues too. Does have some pics and discussion on what he did starting about page 23

  5. #5
    Learner Driver outlaw67's Avatar
    Join Date
    May 2015
    Location
    Canberra
    Posts
    16
    Quote Originally Posted by Sandaro View Post
    http://www.mysandman.com.au/forums/s...-Woohoo/page23

    Not sure if it will help you, but Damo had some issues too. Does have some pics and discussion on what he did starting about page 23
    thanks mate

  6. #6
    first you need to know what gas your going to use that will tell you which compressor to get a sanden for r134a then you need a bracket for the compressor
    speedyair has the brackets which you use with the hz lower bracket from factory ac .when installing the compressor you will need 4mm spacers for alignment
    to bottom pulley. ok power steering goes onto first groove , second groove water pump alternator , third groove is your ac belt

    hope this helps

    george

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •