Results 1 to 10 of 14

Thread: 253 wont start / run

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    It's a rockin' Sandaro's Avatar
    Join Date
    Jul 2011
    Location
    Picton NSW
    Posts
    1,129
    If you have just put in the electronic cool for the first time, it needs different wiring done, as said to give 12volts all the time

  2. #2
    Cruiser Wombat7051's Avatar
    Join Date
    Oct 2013
    Location
    Caloundra, QLD
    Posts
    345
    Hey all, gave up and decided to use another 253 I had. Pulled the manifold and no cross over hole, but one on the heads. Would that have caused problems?

  3. #3
    Sandman Driver damienengland's Avatar
    Join Date
    Oct 2012
    Location
    Chelsea, Victoria
    Posts
    783
    Quote Originally Posted by Wombat7051 View Post
    Hey all, gave up and decided to use another 253 I had. Pulled the manifold and no cross over hole, but one on the heads. Would that have caused problems?
    I think the exhaust crossover will help warm the inlet manifold for better fuel burn when the engine is cold and also allow the mechanical choke heater to operate if you've got one...might be wrong on the fuel burn bit, but i'm convinced i've read it someplace.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •