Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Salisbury v8 diff with disks

  1. #1
    Learner Driver
    Join Date
    Mar 2014
    Location
    Caloundra
    Posts
    10

    Salisbury v8 diff with disks

    Just a basic question but did any ute/van come out with disk break rear end? I have drums on my HJ pano and would like to go to disk if possible, is there room for disk with the leaf springs there?
    Thanks

  2. #2
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    No vans or utes came out with disk brakes afaik
    you can put rear disk on no problems
    Last edited by Valencia; 10-08-2019 at 08:56 PM.

  3. #3
    Learner Driver
    Join Date
    Mar 2014
    Location
    Caloundra
    Posts
    10
    So what would it take to do that would you know, is it as easy as taking the parts off a disk break diff and bolt onto mine or bit mor than that. I did read once the axles had to be changed too but then I did read the springs would be in the way too

  4. #4
    Cruiser Kingcoffee's Avatar
    Join Date
    Jan 2013
    Location
    Bendigo
    Posts
    258
    Would also like to know

  5. #5
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    From memory Statesman rear disc conversion and it should all bolt straight up to Salsbury diff housing its been so long i have played with these things but getting back into it now

    - - - Updated - - -

    There might be a little more to it but not a hard conversion
    Why do you want rear discs ??

  6. #6
    Quote Originally Posted by Valencia View Post
    From memory Statesman rear disc conversion and it should all bolt straight up to Salsbury diff housing its been so long i have played with these things but getting back into it now

    - - - Updated - - -

    There might be a little more to it but not a hard conversion
    Why do you want rear discs ??
    I agree ...
    Seems like a lot of work for not a great deal ..

  7. #7
    Cruiser
    Join Date
    Sep 2013
    Location
    Eastwood, NSW
    Posts
    366
    It is not a simple bolt-on job.

    Yes, the axles & complete brake assemblies will swap from a disc rear to a drum, the housings are the same.

    The big drama (also why GMH didn't offer the option) is that the handbrake lever on the inside of the caliper, fouls the leaf springs.

    I've fitted rear discs to my HZ B06 One-Tonner & I've had to fit lowering blocks & also re-drill & rotate the caliber mount relative to the diff housing.

    Very fiddly but it is do-able.

    You always hear " yes, no problems my mate did it to his panno". When you actually check it out they never seem to have a working handbrake.

    Dr Terry

  8. #8
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Quote Originally Posted by pj350 View Post
    I agree ...
    Seems like a lot of work for not a great deal ..
    I had rear disc brakes years ago on my current Sandman
    cut them off went back to drum

  9. #9
    It's a rockin' Sandaro's Avatar
    Join Date
    Jul 2011
    Location
    Picton NSW
    Posts
    1,128
    Honestly unless you're circuit racing (or drive on the road like you're on a circuit) and need to reduce brake fade for hard stops every 20 seconds the drums will do fine

  10. #10
    Learner Driver
    Join Date
    Mar 2014
    Location
    Caloundra
    Posts
    10
    If drums are as good why are newer cars got disk all round, Utes wagons ect? I'm running a 350 chev and was always to the belief that you put more power in the brakes have to go with that too

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •