Results 1 to 10 of 10

Thread: HZ Van Project

  1. #1
    Learner Driver
    Join Date
    Dec 2019
    Location
    St Andrews
    Posts
    3

    HZ Van Project

    Hi Everyone

    I thought I had better post some pics of my project.
    I picked this up in December 2017.
    I believe a roadworthy was attempted in 2006.
    It failed, went into the shed & waited for me.

    DSC_0344.jpgDSC_0350.JPG
    DSC_0351.JPGDSC_0352.JPG

    DSC_0358.JPGDSC_0359.JPG
    DSC_0363.JPGDSC_0364.JPG

    I've done quite a bit to it since getting it home.
    I will post some updates later.

    Out of the factory she was a plain old HZ Holden Van.
    October 1978 on the ID tag.
    Not Sandman, not even Kingswood.
    202 with 3 on the tree.
    In that daggy commercial tan beige colour.
    I have heard that that colour may have been SEC, PMG, Board of Works, Telecom or Gas & Fuel.????
    Don't know who to believe but I have a theory that Holden just had a Commercial Fleet colour that they gave to these big utilities.

    It has been got at a bit over the years.
    It now has a 1972 (HQ) 253 with a Trimatic.
    That's the way i will keep it I think.
    The Cragar's will stay but most likely get some paint as they are rusty.
    I've put GTS flutes in the guards & will paint HX Aquarius.
    Not planning any Sandman stripes.
    It had Commodore buckets but they are now gone & an original bench will go in.

    Just wanted to share my progress & utilise this valuable resource as I am going to have lots of questions for the experts down the track.

    Cheers
    Last edited by ennisfargis; 04-01-2020 at 05:25 PM.

  2. #2
    It's a rockin' Sandaro's Avatar
    Join Date
    Jul 2011
    Location
    Picton NSW
    Posts
    1,122
    Welcome mate, love to see the progress photos of a project. Love to help out.

  3. #3
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,092
    Welcome to the forum
    we love projects here and plenty of pics
    plenty of gurus to help
    cheers G.

  4. #4
    Looking forward to seeing finished!

    Cheers Kiwi
    It is not about the journey,It is the style we travel in!

  5. #5
    It's a rockin' Robbo's Avatar
    Join Date
    Mar 2010
    Location
    Sunshine Coast
    Posts
    1,570
    Look forward to the progress.
    "Proud To Be An Old Fart".

  6. #6
    Learner Driver
    Join Date
    Dec 2019
    Location
    St Andrews
    Posts
    3
    I'll keep posting updates of what I've done up till now.
    It's been a couple of years since I got it but I'd like to document & share the process.

    The original colour I think is called Kiewa Grey.
    Code 568-0105
    A Commercial Fleet Colour
    You can see it as the bottom layer here.
    IMG-0164.jpg
    Then it has had a coat of blue, in some cheap paint which turns to paste whenever i hit it with the wire wheel.
    It all needs to come off. Probably using a heat gun as it just clogs everything else.
    And finally a top coat of Matt Black from spray cans. (Any tips for removing crap paint welcomed)

    Also some peanut thought it would be a great idea to fill the Rain Gutters with bog.
    I disagree so the first task is to remove it.
    Not sure of the thinking here...????
    DSC_0365.JPG

    Then got it settled into it's new home.
    DSC_0370.JPG

    Next up, removing the carpet from the back.
    (Note the Fuzzy Dice)....heehee.....
    DSC_0378.JPGDSC_0379.JPG

    Thanks for the Warm Welcome.
    Till next update..
    Cheers

  7. #7
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,092
    Paint stripper and cling wrap to get old paint off
    messy but effective

  8. #8
    Cruiser axistr's Avatar
    Join Date
    May 2017
    Location
    Windsor NSW
    Posts
    274
    There is no easy way of getting multi layers of paint and bog off the body, any many different techniques. As gene has said paint stripper then put cling wrap over it so stop the stripping agents from quickly evaporating off to quickly helps give it a bit more zing. Very messy and you will still have to spend many hours sanding the panels after paint stripping.

    A course paint stripping disc on a 4" or 5" hand held angle grinder gets it off reasonably quick if you don't mind the dust everywhere. Make sure you use a mask because you don't know what nasty paint could be on there. TIP, if using a stripping disc keep moving the disc around and don't concentrate in one position as heat build up can cause warping of the metal panels if you let it get to hot.

    And let the hard work begin, best of luck,

    Cheers Lenny.

  9. #9
    Also just do a bit at a time.
    You see more progress that way!

    Cheers Kiwi
    It is not about the journey,It is the style we travel in!

  10. #10
    Learner Driver
    Join Date
    Dec 2019
    Location
    St Andrews
    Posts
    3
    Quote Originally Posted by axistr View Post
    A course paint stripping disc on a 4" or 5" hand held angle grinder gets it off reasonably quick if you don't mind the dust everywhere. Make sure you use a mask because you don't know what nasty paint could be on there. TIP, if using a stripping disc keep moving the disc around and don't concentrate in one position as heat build up can cause warping of the metal panels if you let it get to hot.
    By Stripping Disc do you mean those resin type discs that look like a sponge, only much harder than a sponge..?
    Cheers

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •