HZ Horn Centre fixing kit.

**HZSanFan** · 17-09-2021, 10:20 AM

Would anyone have a picture (or better still have one for sale) of the HZ horn centre fixing kit. I have the horn pad but only half of the plastic fixing ring that attaches the horn pad to the steering wheel horn boss. I have checked eBay and various reproduction stores without luck. I was going to look into getting one 3D printed, any help appreciated. Cheers

**maxsandman** · 17-09-2021, 11:15 AM

You're talking about the white plastic part that the horn cap slips over?
Under that is the alloy part, same shape, that the horn contacts & the 4 springs mount on. Do you have all that?

**maxsandman** · 17-09-2021, 09:03 PM

Resized_20210917_193559.jpeg

**HZSanFan** · 20-09-2021, 10:44 AM

I have the complete horn setup except the white plastic retainer that the HZ horn pad slips over. I have half of it and if I can't source one I was going to look into having on 3D printed.

**HZSanFan** · 20-09-2021, 11:04 AM

Thanks for your reply, This is the set up I have. It seems to differ from the set up you have show. CheersHorn.jpg HornA.jpg

**HZSanFan** · 24-09-2021, 09:21 AM

Originally Posted by maxsandman

Resized_20210917_193559.jpeg

Worth a try, would you like to sell one of these?

**wbute** · 24-09-2021, 04:06 PM

They are two different caps. One is the earlier one with the Allen screws. Yours is the later HZ one that has no screws. You need the insert that suits and you should be able to get it from rare spares. They make a complete steering wheel anc I am sure they do the caps separately.

**HZSanFan** · 25-09-2021, 01:49 PM

Originally Posted by wbute

They are two different caps. One is the earlier one with the Allen screws. Yours is the later HZ one that has no screws. You need the insert that suits and you should be able to get it from rare spares. They make a complete steering wheel anc I am sure they do the caps separately.

I have seen plenty of Q to X caps and fittings but haven't been able to find anything for the Z's as yet. I will be able to make what have work but just trying to see if anything was out there, Cheers

**maxsandman** · 26-09-2021, 11:09 AM

Originally Posted by wbute

They are two different caps. One is the earlier one with the Allen screws. Yours is the later HZ one that has no screws. You need the insert that suits and you should be able to get it from rare spares. They make a complete steering wheel anc I am sure they do the caps separately.

Oops, I forgot about HZ having the different cap, I always remember those caps on UC torana & SL/E statesmans

Originally Posted by HZSanFan

Worth a try, would you like to sell one of these?

Sorry, not selling any gear til I finish some projects. But I will keep you in mind..... If it was me, I'd be using the Allen key headed horn cap, IMHO they look way better! The rare spares early ones look identical.
Then keeping an eye out for an original while you drive your HZ