Results 1 to 10 of 279

Thread: Mooks HQ, HJ, HX, HZ, WB Sandman Mockup

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Sandman Driver mook's Avatar
    Join Date
    May 2010
    Posts
    744

    Haven't Posted any Progress for a while...

    I haven't posted how the van is going recently, i have been super busy with work..
    Not the greatest but i got to pay for the van somehow.

    The van has moved from the panel shop a while ago to a mates place where it can be safely put back together. (Blocker i haven't seen your beast in there yet?)

    At the moment I'm hunting a good pair of bonnet hinges. All of the ones that i have are very loose.

    If anyone knows how to fix them, or somewhere where they can be fixed, please let me know.

    I'm also getting back into ebay to sell off some of my clutter that i know i won't need.

    I'm looking for some advice on a block & trans that came from the magical tunner that I got my hands on (for those who remember)

    The bores on the block measure
    4.0560 Inches
    What size oversize is this?

    There is also a T350 (well that's whats stamped onto the pan)

    Now what could I look for to help describe their condition.

    The Block's date cast is 24F6 and the no is almost indistinguishable 11QT7###

    Quote Originally Posted by stickthis View Post
    Fully sik mook!

    You going to stripe it?
    I Still don't know to be honest, probably with HQ-HJ if anything.

    Cheers in advance.


    Also, does anyone know of any good zinc platers in adelaide?
    Last edited by mook; 26-04-2011 at 01:19 PM.

  2. #2
    Super Moderator Absinth's Avatar
    Join Date
    Feb 2010
    Location
    Junee, NSW
    Posts
    1,937
    The blocks cast date is 24th June 76 so it is 308 out of a July-Aug 76 HX Statesman.

    Van is looking good Mook....
    4/75 HJ XX7 Sandman Panelvan ... Persian Sand currently restoring
    7/76 HX Monaro 4dr 308 4sp... Absinth Yellow and rusty as hell.. SOLD
    3/77 HX Sandman Panelvan ... Absinth Yellow and rusty as hell .. SOLD

    http://www.44gpw.info/sandman-decalssmall2.jpg

  3. #3
    Sandman Driver mook's Avatar
    Join Date
    May 2010
    Posts
    744
    Cheers Absinth,
    How do you tell that its statesman? I'm guessing 11QT
    I'll have to get some photos of the dash up to see what you think.
    To be honest this resto has been very testing for me, never having done any work on cars before i completely underestimated the amount of time and money that it would take. It's getting oh so close now.

  4. #4
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    The 11 on the front of the number is stato.

  5. #5
    Super Moderator Absinth's Avatar
    Join Date
    Feb 2010
    Location
    Junee, NSW
    Posts
    1,937
    You guessed correctly.... 11QT is Statesman.... well the 11 bit anyway.

    Hehe..... cost of restoring....... think of the maximum amount you think it will cost and then DOUBLE it and you will be close to actual cost....
    4/75 HJ XX7 Sandman Panelvan ... Persian Sand currently restoring
    7/76 HX Monaro 4dr 308 4sp... Absinth Yellow and rusty as hell.. SOLD
    3/77 HX Sandman Panelvan ... Absinth Yellow and rusty as hell .. SOLD

    http://www.44gpw.info/sandman-decalssmall2.jpg

  6. #6
    Cruiser TwoTees's Avatar
    Join Date
    Nov 2010
    Location
    Canberra
    Posts
    205
    Quote Originally Posted by Absinth View Post
    Hehe..... cost of restoring....... think of the maximum amount you think it will cost and then DOUBLE it and you will be close to actual cost....
    And for the labor use the same rule but triple rather than double.

    Looking good Mook! Keep the assembly pics coming.

  7. #7
    Sandman Driver mook's Avatar
    Join Date
    May 2010
    Posts
    744
    Ok, so the bonnet is ready to go back on now.
    I have some new hinges coming from oz (thanks mate)
    So when they arrive I will be able to test out my zinc plating kit.
    My ultra sonic cleaner isn't working as well as i expected. I think that this is because the plastic container that the ultrasonic transducer is attached to is insulating the "noise" too much.

    Ill post up a pic once i have the two working nicely.

    Another Question:

    Has anyone ever had their front breaks rebuilt? I have PBR type, and am looking to freshen them up aesthetically as well as mechanically. So I was thinking new rubbers and sandblasting the caliper bodies..

    Any suggestions or recommendations welcome.

    Cheers

    Here is the bonnet BTW..
    van bonnet.jpg

  8. #8
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Take them to a brake place. They will probably sleeve the cylinders for you and I think generally they bead blast callipers(what I have read elsewhere).

  9. #9
    Cruiser TwoTees's Avatar
    Join Date
    Nov 2010
    Location
    Canberra
    Posts
    205
    Quote Originally Posted by mook View Post
    Has anyone ever had their front breaks rebuilt? I have PBR type, and am looking to freshen them up aesthetically as well as mechanically. So I was thinking new rubbers and sandblasting the caliper bodies..

    Any suggestions or recommendations welcome.

    Cheers

    Here is the bonnet BTW..
    van bonnet.jpg
    Mook,
    I recently rebuilt the callipers on my cruiser. You should be able to buy a seal kit. Its not too hard. I used compressed air to get the pistons out, polish them with 1200 wet+dry, clean everything and put them together with the supplied lube. They work great.
    Chris

    edit..............
    I cleaned the outside up with a wire wheel and painted them with a heat proof paint, a cast iron colour, so they didn't go rusty.
    Last edited by TwoTees; 08-05-2011 at 08:25 PM. Reason: more info

Thread Information

Users Browsing this Thread

There are currently 6 users browsing this thread. (0 members and 6 guests)

Similar Threads

  1. WB 1-tonner Overlander mockup
    By HK1837 in forum Vehicles or Items Found for Sale
    Replies: 2
    Last Post: 17-06-2013, 12:42 AM
  2. Mooks big day
    By thatotherguy in forum The Lounge
    Replies: 12
    Last Post: 05-12-2012, 08:16 PM
  3. Mooks dash
    By Absinth in forum Interior
    Replies: 14
    Last Post: 10-10-2012, 01:01 AM
  4. Replies: 16
    Last Post: 06-04-2011, 08:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •