Quote Originally Posted by cafiem View Post
V6HQ, The rear panel was replaced because the old one was a bit rusty. The original one had deeper pressings.
This one is a rare spares one and fitted great ( hopefully the rear window will as well. )
I also replaced the side return bits, they were not as easy b ut turned out OK.
well there you go one of my utes has had some effort put into it, my ute had a little bit between the window sill and back wall, nothing major just cut the section out to be safe, it was just loose rust flakes/dirt/dust the norm, once the utes done ill go nuts with the cavity wax too