HJ V8 dizzy pics

**RodneyHZ253** · 16-10-2011, 06:29 PM

I'am no expert blocker but that dissie has a ignition module on it so 12 volt system wb or latter

**Blocker** · 17-10-2011, 11:55 AM

Thanks Rodney

Anyone need it then?

**wbute** · 17-10-2011, 12:56 PM

Any GMH markings on it? If it is WB I am interested.
As far as I know, its possible to convert a WB electronic ignition distributer to use the earlier points style cap by using a different rotor button from a ford (not sure which model). It then looks close to original, but you never need to muck around with points again.

**HK1837** · 17-10-2011, 01:41 PM

If it is a GMH one then it is what you need for your HJ. Just put the bits on I told you, short the start & run wires together at the ignition switch and away you go. If no GMH markings it is a cheap Chinese knockoff which belongs in the bin.

**Blocker** · 17-10-2011, 01:47 PM

It has no markings on it people... consider it binned.

**jennie285** · 17-10-2011, 04:54 PM

Originally Posted by Blocker

It has no markings on it people... consider it binned.

If it has a bosch ignition module in the silver bit the four wires go on I would like it please.

thanks
J and R

**HJ XX7** · 22-10-2011, 08:17 AM

on the electronic ign distr. there are 2 wires coming out, green and pink.. which wire goes to what + - on the coil ??? thanks..

**RodneyHZ253** · 22-10-2011, 08:40 AM

Originally Posted by HJ XX7

on the electronic ign distr. there are 2 wires coming out, green and pink.. which wire goes to what + - on the coil ??? thanks..

Sorry my aftermarket distributer electronic has red wire going to positive and black going to negative my guess would be
green positive for go,
Pink female type negative.

**HJ XX7** · 22-10-2011, 08:42 AM

thanks... but i just found this link which answered a few of my questions i had.. pink appears to be + and green -....

http://holdenpaedia.oldholden.com/Bo...ity_.28V8.29_: