Results 1 to 10 of 15

Thread: hq-wb front doors

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    Quote Originally Posted by adam perth View Post
    HQ are different to the rest, the midline is lower and the gap around the plenum is bigger + the little insert in the top of the front corner, where as the HJ-Wb don't have these.
    you can always pick them from 10 meters away and they just don't look right on HJ-WB
    glass is different to

    one of my pet hates is when people change doors, but leave the wrong door handle for that model, e.g .HZ/WB handle in a HJ
    adam,they are no different and will all fit the same hole and unless its a real early hq door that had power windows you can easily change the internal hardware by drilling a couple of holes..

    what you may have that does not fit is a taiwanese door shell that was sold in the 90s for a short time..they were really badly produced and did not fit in the areas you are describing..

    i have sold literally thousands of front doors for hq hj hx hz wb in my 30years wrecking cars professionally and i have only ever had problems with those aftermarket ones ive just described.

    hq to wb front doors are all the same and do fit but have little hardware things that are different..

    hq hj early hx have no side intrusion protection..late hx hz wb on sedan/wagon/statesman have side intrusion protection..

    all hq to wb commercials..ute/van/tonner have no side intrusion protection...

    glass and front chanel and the little dovie in the top corner of an hq door are the only things that make a hq door diffent...and the ashtray hole...

    i could probably sit here for another hour typing the small other bits that are different but its not that important..:knockout:

  2. #2
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    So the possible HQ R/H door i have on my HJ could be Taiwan made?
    The gap at the rear of the door (bottom of the window) is o.k. but as the door goes upwards the gap gets bigger.
    BO6 = Rarer then a Sandman

  3. #3
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    i found the biggest problem with them was the window frame and the front of the door where it met the plenum chamber...also as adam said the beauty line wasnt as defined as a genuine door..

  4. #4
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    This is what i mean.

    Original door


    HQ/ Taiwan door?
    BO6 = Rarer then a Sandman

  5. #5
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    i can see by that pic that its not aligned correctly to start with...

  6. #6
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    Picky Picky.
    BO6 = Rarer then a Sandman

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HQ front doors VIC
    By Vombil in forum Vehicles or Items Found for Sale
    Replies: 0
    Last Post: 06-05-2015, 02:17 AM
  2. FX / FJ doors
    By Wally in forum My Items For Sale or Buy
    Replies: 0
    Last Post: 22-01-2014, 09:59 PM
  3. HJ X Z doors
    By locodriver2007 in forum Archive
    Replies: 3
    Last Post: 26-07-2012, 06:39 PM
  4. Hj hx hz front doors for sale
    By Indy Orange in forum Archive
    Replies: 2
    Last Post: 13-05-2012, 10:03 PM
  5. Replies: 0
    Last Post: 22-03-2010, 10:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •