Fitting HZ GTS Dash to WB Ute... Help Needed..

[83 WB_Ute]

Well, I got out there and checked all the wiring. Removed all the guages and made sure I put the wiring back in the right spot, I then went in search of the place to fot those earths..

I could not find a place at all that looked like it was meant to have an earth, so I earthed them to the alloy guage holder and fitted it all back in and started her up.. The battery guage still works and the blinker is gone when you turn the lights on.. But still no other guages work.. Ohh, and now the blinker lights don't even come on when the indicators are turned on... lol

So I have no idea on what could be wrong with it.. I have every wire hooked up to something or earthed and it's still not working.. I went an checked the wiring on the temp sender on the motor and it was a little frayed, but it still had a fair bit of wire left to make a connection..

So I think I will be giving the auto eletrician friends a call and hopefully they can work it out..

Also, it will probably help if I had a wiring diagram for the GTS dash.. So I am in dire need of a picture of a GTS wiring diagram.. It will aid the auto leccy friends heaps and make it easier to find the problem..

So please, let me know if you have a wiring diagram!!

[buck]

gts 2.jpgdoes this help, not sure if its going to be big enoughgts dash.jpg

[83 WB_Ute]

I don't have a yellow needle wiring diagram but do have a white needle HJ diagram that, now I'm back home, I can scan and email you if you need it. Flick me a PM with your email addy in it and I'll send one off ASAP.

Thanks mate.. I will pm you now..

gts 2.jpgdoes this help, not sure if its going to be big enoughgts dash.jpg

Cool, thanks mate... I will print them off and try and enlarge them.. Thanks again..

--- Updated ---

Well, things are just going from bad to worse..

The guages wern't working, and now the battery has gone flat again and the car doesn't want to start.. lol

I have the battery on charge at the moment, and am currently trying to work out why it doesn't want to run.. I'll work it out though, it has spark and compression and it is firing so it must be that it isn't getting enough fuel.. But it is getting some, but not much!!

I fitted the oil pressure sender and that guage works now, so we now have 2 guages working Hopefully soon I will have it all working..