Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: Rares lower tailgate???

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Learner Driver
    Join Date
    Dec 2013
    Posts
    8
    Dads been looking for a new tailgate for his van after his original was replaced about 3 years ago, the one on it currently I'm not sure if it is the old Rares stock or not but was told it was made in Taiwan. Since it was fitted he has complained that it doesn't fit right (does not complete the seal). This is ok for a ute but for a van it lets the exhaust fumes in.

    If this new Rares one fits as per original, we'll definitely be getting one. Let us know how it fits

  2. #2
    It's a rockin'
    Join Date
    Aug 2011
    Location
    SA
    Posts
    1,067
    Quote Originally Posted by Barbs77 View Post
    Dads been looking for a new tailgate for his van after his original was replaced about 3 years ago, the one on it currently I'm not sure if it is the old Rares stock or not but was told it was made in Taiwan. Since it was fitted he has complained that it doesn't fit right (does not complete the seal). This is ok for a ute but for a van it lets the exhaust fumes in.

    If this new Rares one fits as per original, we'll definitely be getting one. Let us know how it fits
    every van i have looked at has a gap between the tailgate and body at the bottom so maybe someone with an original van can have a look at theirs and see if there is a gap?

  3. #3
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Quote Originally Posted by thatotherguy View Post
    every van i have looked at has a gap between the tailgate and body at the bottom so maybe someone with an original van can have a look at theirs and see if there is a gap?
    Between the seal and the body? Mines got all original panels and no gaps. I grew up on a dirt road with the van as my first car and never had any dust or fume problems. Tight as a drum.

  4. #4
    Sandman Guru
    Join Date
    Jul 2010
    Posts
    6,451
    Greg Barker is from Rares, can't remember the title but he is in product development. I spoke to him about the tailgates when they were being done. He will know how many are left and specs etc.

  5. #5
    Night Rider Blocker's Avatar
    Join Date
    Feb 2010
    Location
    Behind the keyboard.
    Posts
    3,166
    gregbark is his username. I'm sure he will be on holidays so don't expect an answer within the week.

  6. #6
    Mr. Rare Spares
    Join Date
    Mar 2011
    Location
    Diamond Creek
    Posts
    68
    Greg is on holidays at the moment but I can tell you that we have substantial stock and that they are Ute Tailgates that have to be modified to suit van which is no big deal just cutting a section out of the top corner. They may not necessarily be a limited run it all depends on sales if they sell well then we will probably continue to make them, at this stage we are a bit up in the air; I would be pushing to continue with them in the future.

  7. #7
    Moderator Alien DNA's Avatar
    Join Date
    Jun 2010
    Location
    Melbourne, Australia
    Posts
    3,315
    Thanks Les, great to know!! Very interested in one myself

  8. #8
    It's a rockin' Big Rob's Avatar
    Join Date
    Aug 2013
    Location
    Eurobodalla NSW South Coast
    Posts
    1,829
    Yep, I'll be ordering one asap.

    Now start thinking about doing TOP tailgates Les! There are NONE left anywhere and the only option is fibreglass. Top tailgate handles would be handy too, they are impossible to find anywhere.
    Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!

  9. #9
    Super Moderator Absinth's Avatar
    Join Date
    Feb 2010
    Location
    Junee, NSW
    Posts
    1,937
    ^^^^ Same... If you have gaps between the lower tailgate and body either the tailgate is bent or poorly fitted...... Or the vans been rear ended at some stage and not repaired properly.
    4/75 HJ XX7 Sandman Panelvan ... Persian Sand currently restoring
    7/76 HX Monaro 4dr 308 4sp... Absinth Yellow and rusty as hell.. SOLD
    3/77 HX Sandman Panelvan ... Absinth Yellow and rusty as hell .. SOLD

    http://www.44gpw.info/sandman-decalssmall2.jpg

  10. #10
    It's a rockin' Big Rob's Avatar
    Join Date
    Aug 2013
    Location
    Eurobodalla NSW South Coast
    Posts
    1,829
    Are the new Rare Spares tailgates complete with hardware, or just a shell? It's not clear on the web page.
    Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Rares vs original
    By Absinth in forum Holden Sandman Q&A
    Replies: 8
    Last Post: 11-07-2015, 10:09 PM
  2. WTB lower tailgate mechanism and level.
    By jaft in forum My Items For Sale or Buy
    Replies: 0
    Last Post: 30-11-2013, 07:00 PM
  3. Tailgate Hinges Lower
    By Les in forum General Spare Parts
    Replies: 5
    Last Post: 28-04-2012, 05:32 PM
  4. Wanted CABLE LOWER TAILGATE LIMIT HXVAN
    By Davestown in forum Archive
    Replies: 2
    Last Post: 17-08-2010, 05:49 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •