Results 1 to 10 of 35

Thread: vintage air below Stato dash

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Leadfoot
    Join Date
    Mar 2013
    Location
    Northampton WA
    Posts
    114
    I don't know about cars drawing air from outside when in defog.
    In my experience in very humid conditions some manufacturers recommend using the ac circuit to dehumidify the air and if needed the heater to worm it up again. Have a read of the owners user manual.
    The inderdash units all have drains for condensation that it is going to make water is a given.
    Blowing hot wet air at a cold windscreen is instant fog material. Ive allways had better results demisting screens with the ac on. Try it sometime or don't you have aircon.
    Air pressure between the sealed cavity behind the B pillar (if it is sealed ) and the inside of the cab is not going to be effected by outside air pressure .
    There is also no such thing as never.

  2. #2
    Learner Driver 308mate's Avatar
    Join Date
    Jul 2011
    Location
    Wootton, north coast NSW
    Posts
    22
    Thanks for the banter guys. Heres a pic of the engine bay

    bay.jpg

    Another of the pano

    pan1.jpg

    I think the movement of the throttle body is a great Idea, but I dont think I'll go that way. I think the V6 conversions solution will suit. Not too certain on the evaporator however...

  3. #3
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Quote Originally Posted by utevanwgn View Post
    I don't know about cars drawing air from outside when in defog.
    In my experience in very humid conditions some manufacturers recommend using the ac circuit to dehumidify the air and if needed the heater to worm it up again. Have a read of the owners user manual.
    The inderdash units all have drains for condensation that it is going to make water is a given.
    Blowing hot wet air at a cold windscreen is instant fog material. Ive allways had better results demisting screens with the ac on. Try it sometime or don't you have aircon.
    Air pressure between the sealed cavity behind the B pillar (if it is sealed ) and the inside of the cab is not going to be effected by outside air pressure .
    There is also no such thing as never.
    Yeah I fitted the integrated air into my WB. I have also had to keep the AC working in 35 year old tractors on my farm for the last 10 years, plus all the other gear on my farm.
    Once again someone has not read the thread and then replied half cocked. I actually wrote; most cars draw the air from outside when on defogger. Not on recirculate.
    Yes it is a given that you run the heater and AC to defogger your windscreen. But never on recirculate. If yu put the evaporated in that cavity, it effectively has no option but recirculate. Your car will fog up fantastically even with heat and AC on.
    The other point you didn't read was the receiver drier, not the evaporator. It will build up condensation and rust the floor out. It needs to be in the engine bay. Not to mention you have to pull the dash out when ever you re-gas because you need to change the receiver drier. Just trying to point out that it is just dripping straigt onto the floor pan. I realise the evaporator has a drain.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Hot rod and vintage car show
    By robp in forum The Lounge
    Replies: 2
    Last Post: 21-06-2013, 10:36 PM
  2. excellent options on a stato...
    By mauser in forum Archive
    Replies: 4
    Last Post: 30-06-2011, 11:41 PM
  3. WB Stato Jack usage sticker.
    By stickthis in forum Archive
    Replies: 11
    Last Post: 18-10-2010, 07:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •