Its finally in etch prime! Woohoo

[damienengland]

Electrical Stage 2. This was looming the engine and transmission (4L60E) to the Haltech ECU under the console and included new functions that i hadn't originally thought about (like changing from a VS dizzy to a VT dizzy). I had previously done an engine loom, but wasn't happy with some of it so ended up mixing in new Haltech wires with some of my older work.

Engine and transmission looms come through a floor grommet under the console area...
PXL_20230406_062402877.jpg

The Haltech Elite 2500 ECU, CANBus module and extension relay box fitted neatly into the old WB console...
PXL_20230407_053650903.jpg

PXL_20230407_052245776.jpg

Even with plenty of room under the console, it still got hectic doing the wiring...
PXL_20230407_073540799.jpg

Eventually everything was wired in and ready for testing. This stage needed Haltech on line from Sydney taking over my old laptop and remotely programming all my circuits to match with the Haltech inputs and outputs. Remarkably, it all went fairly well with no major screw ups. The second laptop in this pic is a Google Chromebook being used to program a digital (GaugeArt) CANbus instrument cluster...
PXL_20230410_051209836.jpg

Then i got to test a bunch of things while watching the new instrument cluster. Yep, i get to use the old cruise control button to tab through the instrument pages...
PXL_20230412_094136467.jpg

[Valencia]

Cool updates

[axistr]

Cool one step closer to the finish line.

[damienengland]

Thanks, definitely getting closer now.

I noticed some of the pics didn't work last night so just went through and updated the broken ones. Should all be visible now.

Cheers
Damo

[Sandaro]

Love seeing the progress of your project.

When are you planning to paint? I would have expected some of this work after paint? Or is it just a mock assembly?

[damienengland]

Hey Sandaro.

Yes you are correct, i should have painted it a long time ago...but my paint man (and myself) got a bit lost along the way. So while i couldn't lock him down to paint i decided to push on and get everything else finished. So essentially yes, this is partly a mock up...but not too much. So my forward plan over the next few months is kind of like this...

Finish the drive train, turn it on, run the cam in and make sure everything is ok.
Shut it down, rip the drive train out and get it painted (black is my choice for the engine)
Paint the firewall while the engine is out (colour is now selected)
Put the engine back in so its a runner
Paint the rest of the body and panels
Install a massive out of control stereo
Trim it out

Happy to share the colour here. I want Tropical Green Candy Base Coat with a white ground coat...the one on the left of the pic.
PXL_20230717_070700876.jpg

[damienengland]

So another Saturday working on the van...and I've come across an issue which has set things back slightly. The MRA assembly in the fuel tank has unfortunately fouled on a floor rib and cracked, so it had to come out to get the assembly moved.

But in better news, i got the front drivers seat mounted in (from a WN Caprice V) with some custom offset templates to fit the seat runners to the existing floor holes. Pics below...

Damaged MRA assembly...Bummer, didn't see this happen...but happy it got spotted in time.
PXL_20230729_012522642.jpg

Gonna move the assembly forward on the tank.
PXL_20230729_023032539.jpg

This is my plan for the seat mounts. First I lopped off a couple of Commodore fixings from the runner base.
PXL_20230805_031450805.jpg

Then make a couple of flat bar pieces with offset bolt holes.
PXL_20230805_040531458.jpg

The seat bolted in nicely and fits well. Not sitting too high and lines up nice and central with the steering column.
PXL_20230805_044911041.jpg

[axistr]

That seat looks exactly the same as the seats in my VF SSV ute. ? Nice and comfy, good choice.

[damienengland]

Thanks Axistr, yep these VF seats are definitely comfy and should be perfect when this thing eventually gets on the road.

These ones are from a WN Caprice V and have the 8 inch screens mounted in the rear headrests, so i'm keen to use as many features as i can. I've been reading VF workshop service manuals and I think i've mapped out the wiring for them...and its a bit epic (out of control)!

Here's my spreadsheet showing the drivers seat loom. That's 16 x wires going into one seat!
Screenshot 2023-08-06 17.53.30.png

[Sandaro]

The seats are very reminiscent of the GTS seats from the 70s with the stripe down the middle. Look right at home.