Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: HZ 2 pin plug near brake booster??

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Quote Originally Posted by damienengland View Post
    My WB diagrams show 2 x plugs with dark green and dark blue wires. One is for emissions and the other is for the washer pump motor. Using guesstimate as a line of thought, could these spares be for the old Lucas washer pump that was mounted on the wiper motor? My reasoning is that the location would be close to where the plug is described in the first post and secondly (this next part is a guess) Holden may have opted to leave the older wires (with same colour coding) in the harness so that both types of washer pumps could be installed?
    I had a look at both my Sandman and a HZ Kingswood wagon today and the plug is on the RH side of the brake booster, tucked right down where it can't be plugged into much.

  2. #2
    Jason we are talking about the Dark blue &. Dark green wires that are moulded
    into the the grommet that passes through the firewall to the engine bay..

    Thankyou for correcting me Dr Terry
    I was just going by the diagrams
    I suppose this could be one of the first cases of one wiring harness fits all models like a lot of modern cars
    Just plug and play
    Regards
    Neil & Cherone

  3. #3
    Sandman Driver damienengland's Avatar
    Join Date
    Oct 2012
    Location
    Chelsea, Victoria
    Posts
    792
    So did this get answered? Its bothering me as i cant find them in my HX - HZ Gregory's wiring diagrams or my WB commercial wiring diagrams.

  4. #4
    Cruiser
    Join Date
    Sep 2013
    Location
    Eastwood, NSW
    Posts
    366
    The blue/green double plug near the booster has an identical twin on the other side of the firewall. If you look under the dash, in the accelerator area you will see it.

    It was GM-H's method of running extra wiring, for any accessories required, without the need to drill new holes in the firewall panel or cut into the waterproof wiring grommets. It consisted simply of 2 wires (blue & green) around 30 cm long, wrapped into the factory harness which disappear under the dash, only to reappear on the engine side of the firewall. They were terminated with a standard 2-pin harness connector it either end.

    The driving light wiring is the only item mentioned in the circuits, issued as part of the HZ intro service bulletin, where these circuits originate. Holden did not publish a proper factory workshop manual for the HZ (or the HX, LX or UC for that matter), so it is not really known what these 'other accessories' were.

    I've used this pair of wires for many different things over the years, such as driving lights, fog lights, air con & thermo fan wiring being the most common.

    Dr Terry
    Last edited by Dr Terry; 28-06-2016 at 07:53 AM.

  5. #5
    Sandman Driver damienengland's Avatar
    Join Date
    Oct 2012
    Location
    Chelsea, Victoria
    Posts
    792
    Thanks Dr Terry, that sounds resolved to me. Interestingly i just found an older thread asking about these on this site, so perhaps the picture from that post will help with identification. See below, cheers

    Picture1.jpg

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •