I picked the van up from the brake specialists last Friday. They tested the master cylinder on the car (it had been previously bench tested elsewhere) and diagnosed a loss in pressure which was due to a burr in the cylinder. They reconditioned it and I now have reasonable brakes but there was still a problem with the pedal depressing. They put a vacuum gauge on the motor and found it was fluctuating at 15 Psi not steady at 20 Psi (I think its Psi). He suggested that one of my cylinders is lacking compression, possibly a valve riding and it should be checked out by the guys that rebuilt the motor (considering it has only done 12,000 km). The short is I get brake vacuum assist at the top of the pedal but because the vacuum in the motor is fluctuating the vacuum cant keep up and the pedal goes down. There you go.





Reply With Quote
Bookmarks