what ignition coil to use?

[deanandeva]

It is a nichrome wire built into the harness. You need an original WB HEI coil, find on any VC-VL (not 6cyl VL). To get 12V to the coil just bridge the start and run wires prior to the ignition switch (go to coil as pink and yellow). This way there will always be 12V at the coil.

Hi Sorry to sound silly but where exactly do we bridge these wires ? are they in the Engine bay loom ?

Appreciate your help (I'd like to get rid of my relay)

Cheers


Dean