Results 1 to 10 of 33

Thread: Opinions please

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630
    [QUOTE=Taily;80805]To me therein lies the crux of the whole question. A DIY complete restoration is achieveable even to someone who doesn't neccessarily have the requisite skills as long as they are prepared to get stuck into learning those skills properly and getting out of their comfort zone and having a red hot go at something.

    When I started on my ute over three years ago I:

    1. Started with something that was already in VGC as it had been completely corrosion proofed when brand new, garaged, maintained and generally well cared for its entire life both before and after I inherited it. I was very lucky to start with something in such good nick.

    2. Already had many of the skills needed to do most of the work myself as I completed a trade as a mechanic many years ago. The skills I didn't have I sought advice from those old school people who did and learnt from them while respecting the fact they didn't have to show me the right way of doing things such as dolly work, welding in repair sections and even the remaining body work and paint. I learnt what I could from them and was prepared that if I made a mistake I would strip it down and start again - which I did do a few times I can assure you.

    3. Only used the best quality parts/panel steel/welder/bodywork consumables/paint/materials and even tools I could get hold of as I didn't want any one thing being the weak link in the chain. And,

    4. Took the time and patience it needed to get the job done right first time - though I will say I should have hired a paint booth rather than build my own one to paint the ute as it would have actually been cheaper to hire one for a day. In fact while you're there grab the painter as well as they can save you more money than they will cost...






    So you had a awesome car to start with and ability to do it all yourself and the body alone cost $5K before you've done interior, driveline etc?
    BQZ

  2. #2
    Super Moderator Taily's Avatar
    Join Date
    Oct 2011
    Location
    NW Sydney
    Posts
    1,185
    Quote Originally Posted by Vombil View Post
    So you had a awesome car to start with and ability to do it all yourself and the body alone cost $5K before you've done interior, driveline etc?
    Oh, I wouldn't say awesome all around. It had previous repaired accident damage (in the late 70's) around the filler neck area that had been stoved-in probably 6-8 inches originally that had been just pulled out to close to the right shape and then slapped-up with up to half an inch of bog, the usual dents in the front guards and tailgate from gateposts (grandma was a lovely old lady but she probably should have given the driving thing away a bit earlier but hey it was really cool to have a grandmother who drove a V8 ute!) that had also been slapped-up and the odd very small and localised spots of rust in the lower rear guard (both skins) and in the plenum groove where the lower windscreen strip had nicked through the paint. So while it looked kind of OK (from 20 feet away) for what is now termed a survivor, if left too much longer it would have become very serious very fast, especially under the repairs that had surface rust under the bog causing it to crack away around the fuel filler and around the screen channel where the pitting was beginning to go through. So while the early attempts at inhibiting corrosion were good, it was beginning to succumb after 36 years (2011).

    That $5K includes a donor ute for the genuine front guards (that I then wrecked-out and made a trailer with afterwards), a full rubber kit, interior carpet, new hoodlining and windscreen, new sound deadening/insulation, a decent second hand mig welder/wire coils and gas, a new 1.2mm nozzle spray gun, all bodywork consumables (including a small media blaster) and also the 2 pack undercoat and two seperate and complete 2K top coat systems. Could have got away with it much cheaper if I didn't have to replace/purchase a few things. Interior thankfully doesn't need much more but the driveline wont be cheap.

    As has been pointed out... That time spent on it - is it really free? Yes and no, as it depends what you actually intend to get out of the whole exercise (personally) and what your intentions are for the vehicle - if you're doing it to sell or keep it. If you are doing it to make a big profit then you've got a better chance on the lottery and more pub/fishing time to show for it. If you're doing it for the experience of the build and the ability to say you built it, not bought it - then go for it. It costs one way or the other!
    Nunc est bibendum...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. just some opinions please
    By HJRAY in forum The Lounge
    Replies: 10
    Last Post: 05-06-2014, 03:40 PM
  2. opinions on hz Ute?
    By hulkamania in forum Replica Sandmans
    Replies: 26
    Last Post: 25-01-2013, 09:30 PM
  3. Looking for opinions on this possible HJ XX7
    By Norwester in forum HELP... Is This a Sandman?
    Replies: 15
    Last Post: 22-07-2011, 10:34 PM
  4. Opinions people?????
    By Absinth in forum Interior
    Replies: 10
    Last Post: 10-05-2011, 09:05 PM
  5. in need of some opinions on this van
    By kaido17 in forum HZ Sandman
    Replies: 57
    Last Post: 11-05-2010, 01:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •