Just curious as to how many other people raced out and checked their tyre hanger after reading this thread only to find (like me )
that the winch and cup were missing.....
or had the wrong one for the rallye rims?? :errf:
Just curious as to how many other people raced out and checked their tyre hanger after reading this thread only to find (like me )
that the winch and cup were missing.....
or had the wrong one for the rallye rims?? :errf:
Ours on the yellow van was missing because a gas tank had been installed, and the cross member had been cut out as well....our Red van was intact with spare GTS rim still in place....Originally Posted by high voltage
HZ Jasmine Yellow Windowless Sandman, now being driven everywhere and is finished!
HZ Madeira Red Windowless sandman now Sold to Bigrob
HX Mandarin Red Sandman Ute finished, and club registered
1979 HZ malachite windowless van with 308 5spd, all chromed up and shiny finished and named "The Player"
Married to RodneyHZ253
Mine is a 3/79 HZ which would have had N67 rims standard. It has N66 rims on it now but still has an N67 spare with the big disc retainer on the winch.
SNDMN
79 HZ Sandman XX7 Van Flamenco Red - out 'n' about cruzin'
Hmm, so its my understanding the spare wheels lives underneath the Sandman? :Chin:
Is this the N67 whinch without the lifting plate?
http://cgi.ebay.com.au/HOLDEN-HQ-HJ-...#ht_500wt_1156
Ah its probably common to all I suppose just with a different plate.
Last edited by wbute; 08-02-2011 at 10:00 PM.
Where is OZBOX when you need him... lol
Mauser
At his daughters wedding in Indonesia somewhere.....
HZ Jasmine Yellow Windowless Sandman, now being driven everywhere and is finished!
HZ Madeira Red Windowless sandman now Sold to Bigrob
HX Mandarin Red Sandman Ute finished, and club registered
1979 HZ malachite windowless van with 308 5spd, all chromed up and shiny finished and named "The Player"
Married to RodneyHZ253
Yeah I think the winch and rope are all the same. I thought the n67 might have had a different rope end but after looking they are all the same.
No. Should look like this...........
with this...........
See how the ebay one has a shoulder at the top of the bolt bit so you can tighten the nut at the bottom up against the wheel holder bit and rubber and this one needs to slide through the plate after you hook it over the wire.
Heres the ebay one for reference...
Last edited by Alien DNA; 01-06-2018 at 03:34 PM.
So do you plan on replacing the cross member and winch ?
Makes you wonder what happens to them after they have been removed for the gas tank..
There are currently 6 users browsing this thread. (0 members and 6 guests)
Posting Permissions
Reply With Quote
Bookmarks