HQ Chromed Upper Doors

**SandmanMuscle** · 16-03-2011, 09:44 PM

I found some on ebay that came of a ute so there are only 2, perfect for me. Im still undecided whether to go the whole lot trimmed like above pictures or have the door blacked out and the top gutter and behind the door trimmed.

I also found 1 gutter trim on ebay for $120, seems a bit steep though.

**wbute** · 16-03-2011, 09:48 PM

http://cgi.ebay.com.au/HOLDEN-ONE-TO...item3cb601ce9b

There was a bloke selling new ones for less than that!

The Kingswood vertical ones go for 100 plus if they come up. The stato trim is every where.

**SandmanMuscle** · 16-03-2011, 09:55 PM

http://cgi.ebay.com.au/ws/eBayISAPI....tchlink:top:en

This is them yes?

**HK1837** · 16-03-2011, 10:38 PM

Nope.
Have a close look at this ute. See the vertical stainless just behind the door frame. It goes in that little recess behing the door.

http://cgi.ebay.com.au/1978-Holden-H...item27b9456b28

**wbute** · 17-03-2011, 08:10 AM

Watch out for dodgy brothers home made/modified ones.

**ozbox** · 17-03-2011, 10:47 AM

good undamaged verticals are worth $250.plus...ive been getting that price for the last 10 years..with marks in them $100 for the pair..
statesman hq to hz front door moulds undamaged are worth $350 for the pair of doors.with marks in them 100 to 150 for the doors..
wb statesman door moulds are worth $110 for the pair of doors..
use car gutter moulds and cut them down..generally $90 for a pair..

you want perfect mouldings you will pay because to have them repaired is expensive..

**HK1837** · 17-03-2011, 10:51 AM

Lucky I collected heaps over the years when they were $5 each! I used to pull them (gutter plus verticals) off every HQ-WB Kingswood ute I saw at a wreckers, and use them on tonners.

**wbute** · 17-03-2011, 08:04 PM

Vertical b pillar strips. Most over priced HQ-WB part there is in my book.
http://cgi.ebay.com.au/HOLDEN-HZ-WB-...item27b985d358

**Nigelk777** · 17-03-2011, 09:22 PM

I have a set of Hz or WB (not sure which) stainless door moulds (but not vertical pillar strips) if anyone's interested. They have a black line moulded into them. One of the vertical door strips seems to be nos (still in a sealed plastic bag - but not with GMH markings). If anyone's interested you can PM me. They've been wrapped up for years, but from memory they're unmarked. I don't need them as have a complete set on my doors already (see the madeira HZ ute in the album section). Nige