14" SLE/Rally rims (not mine)

[TwoTees]

Here's more on evilbay. These look like commodore. I thought the stud pattern is a poofteenth different.
Can any one confirm this?

http://www.ebay.com.au/itm/HOLDEN-SA...item2a123729d4

[agr071]

Here's more on evilbay. These look like commodore. I thought the stud pattern is a poofteenth different.
Can any one confirm this?

http://www.ebay.com.au/itm/HOLDEN-SA...item2a123729d4

Yes i've been watching these to see what happens with them.
HQ - WB is a PCD of 120.00mm and Commodore has a PCD of 120.65mm. So they WILL break the studs.

[wbute]

Commodore are 15" and HZ-WB are 14". Different wheels all together.

[agr071]

I messaged one bloke about 6 months ago, who had a set of 14's for $50 and he said that they came off a Commodore.
That's why i now ask the question as to which vehicle (with a pic for proof).

--- Updated ---

The guy with the gold ones just replied to me with a part number to confirm it's HZ.
Don't look to bad in the gold.
Would be good to have a set in storage.:Chin::Chin::Chin:

[ozbox]

the wheels actually look different because of there offset as well.....its fairly easy to confuse the torana sle rim with the hz at a glance..and gemini its just a no brainer..

[Nearly]

No Confusion, torana and gemini wheel would both qualify as a "version of" an SLE wheel as stated above just as a gts wheel would qualify as "a version of" its pontiac equivilent no?

[ozbox]

.its fairly easy to confuse the torana sle rim with the hz at a glance..

my point was at a glance its easy to confuse ..as in pictures etc...as for pontiac rally 2 wheels and gts wheels they are one in the same up till roh started making them in australia which was not until 1973 lateish...but in saying that rally 2 wheels for pontiac were in 14x6 and 14x6 with a different off set and 15x6 and 15x7..but were all called rally 2s.

[agr071]

If i didn't have so many mags around the place, i'd possibly look at getting a set of these.

[Nearly]

I think your agreeing with me Greg? and yes I know the history I have 3 out of the 4 mentioned styles here. Canadian produced rims that came off my 1/73 gts coupe, the Australian produced ones which I bought and will put on the Hq ute when I get it back and a set of 15 x 7's Pontiac rims which I got from a bloke near the ACT that imports Ponti's, since sandblasted and awaiting paint.

[agr071]

So....... Did Pontiac ACTUALLY make a 15" for the HQ stud pattern OR would you have to get the HQ to VH stud adaptors?