Results 1 to 10 of 12

Thread: Turbo 400 Original shift and linkage.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Super Moderator Taily's Avatar
    Join Date
    Oct 2011
    Location
    NW Sydney
    Posts
    1,185
    Quote Originally Posted by JDT View Post
    Wanted to buy. Complete T-bar shifter and linkage assembly to suit a TH 400. Please pm me if you have a spare one (or two). Are Tri-matic assemblies the same?
    When looking from the back of the installed shifter the TH400 lower arm and linkages (all the stuff under the floor) are off the left (passenger side) of the vehicle, the trimatic ones are off to the right. I don't have a spare, but do know where there is a fairly well used one (at a mate's place - which he doesn't need as he has sold his project) which isn't perfect (it is a bit old and needs a linkage rubber - I was looking at it on the weekend) but might get you out of trouble if you're really stuck. I don't think he has a t-bar handle for it but you can still pick them up new om ebay etc.

    Suggest send the member [MENTION=119]ozbox[/MENTION] a PM, he should have some good ones or know where to get one for you.

    Regards,

    Dave.
    Nunc est bibendum...

  2. #2
    Leadfoot JDT's Avatar
    Join Date
    Apr 2012
    Posts
    138
    I'll send ozbox a pm.
    Thanks

    Jim

  3. #3
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    byron....they are a different shaped arm and when you do that to a trimatic assembly it still does not work correctly..

    - - - Updated - - -

    Quote Originally Posted by Taily View Post
    When looking from the back of the installed shifter the TH400 lower arm and linkages (all the stuff under the floor) are off the left (passenger side) of the vehicle, the trimatic ones are off to the right. I don't have a spare, but do know where there is a fairly well used one (at a mate's place - which he doesn't need as he has sold his project) which isn't perfect (it is a bit old and needs a linkage rubber - I was looking at it on the weekend) but might get you out of trouble if you're really stuck. I don't think he has a t-bar handle for it but you can still pick them up new om ebay etc.

    Suggest send the member [MENTION=119]ozbox[/MENTION] a PM, he should have some good ones or know where to get one for you.

    Regards,

    Dave.
    dave i appreciate you giving leads to people but please dont bother pointing them to pm me as i very rarely come here anymore..i am a business with a phone number of 0249594546...cheers greg

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Could you get a floor shift without console?
    By ambientgoat in forum Holden Sandman Q&A
    Replies: 17
    Last Post: 07-06-2014, 08:55 AM
  2. clutch linkage
    By thatotherguy in forum Driveline
    Replies: 8
    Last Post: 29-02-2012, 03:13 PM
  3. Floor shift cut out
    By wbute in forum Paint & Panel
    Replies: 6
    Last Post: 13-06-2011, 06:18 PM
  4. Replies: 7
    Last Post: 17-07-2010, 12:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •