Hj sandy ute or rep

[HK1837]

If it isn't a Sandman it will have 2 x rear "console" brackets for the seat separator, so if it is the rear one you saw that is no help. It is the front one in front of the shifter hole that will indicate a Sandman.

Sounds like accessory or aftermarket strips. Originals only had holes on the ends, with studs in betwen. Studs are the same as the ones used for teh windscreen moulds or for the moulds behind the doors on Kingswood utes.

[blacksandy]

If it isn't a Sandman it will have 2 x rear "console" brackets for the seat separator, so if it is the rear one you saw that is no help. It is the front one in front of the shifter hole that will indicate a Sandman.

Sounds like accessory or aftermarket strips. Originals only had holes on the ends, with studs in betwen. Studs are the same as the ones used for teh windscreen moulds or for the moulds behind the doors on Kingswood utes.

It is the front bracket in front of the shifter that has been cut down as it has a after market shifter fitted now.

I will try and scan the papers and a pic and add them on here.havent done that before so if it dose not work mabey i could email to you Taily and you could put it up for me but i will give it a go.