Results 1 to 10 of 279

Thread: Mooks HQ, HJ, HX, HZ, WB Sandman Mockup

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Sandman Driver RodneyHZ253's Avatar
    Join Date
    May 2010
    Location
    Parkes Central West NSW
    Posts
    718
    I groved the felt out so that the bow did not contact it and left clearance each side of the bow so when the lining was pulled tight the bow could move with reference to the lining I didn't end up using the thin wire and clip it to roof brace i couldn't get lining taught so I made up an extra bow out of mild steel rod to match the two rear bows I had.

  2. #2
    Sandman Driver mook's Avatar
    Join Date
    May 2010
    Posts
    744
    Quote Originally Posted by RodneyHZ253 View Post
    I groved the felt out so that the bow did not contact it and left clearance each side of the bow so when the lining was pulled tight the bow could move with reference to the lining I didn't end up using the thin wire and clip it to roof brace i couldn't get lining taught so I made up an extra bow out of mild steel rod to match the two rear bows I had.
    Thankyou, very helpful.
    I don't have the little lugs where the wire would go on my van (maybe a WB thing) so I think that this will work well for me.
    I'm sure i can find another roof lining bow from another car that i can quickly modify.

    The new bow I'm assuming was put in place just behind the bulkhead but leaving room to move when tensioning. (maybe 1cm back)

  3. #3
    Leadfoot HZ EVIE's Avatar
    Join Date
    Mar 2010
    Location
    Country Vic
    Posts
    159
    Sounds like it's going well Mook, can't wait to see the finished product (I bet you can't either!!).
    On the note of head lining bow's I know we used to be able to buy reproduced bow's, but can we still, should I look at getting some second handies, or should I try and get some made up. Hoping in the next couple of months to have mine to the headling stage, so I had better get my but in gear!
    79 HZ XX7 308 Windowless Van . Driving with a big grin. A few little finishing touches required

  4. #4
    Sandman Driver mook's Avatar
    Join Date
    May 2010
    Posts
    744
    Quote Originally Posted by HZ EVIE View Post
    Sounds like it's going well Mook, can't wait to see the finished product (I bet you can't either!!).
    On the note of head lining bow's I know we used to be able to buy reproduced bow's, but can we still, should I look at getting some second handies, or should I try and get some made up. Hoping in the next couple of months to have mine to the headling stage, so I had better get my but in gear!
    Drop Oz a line, he may be able to help you with the roof lining bows.

    I have re-listed my fancy dash facia
    http://www.ebay.com.au/itm/130565444...84.m1555.l2649
    I can post better pics if anyone is interested.
    Last edited by mook; 22-08-2011 at 11:47 AM.

  5. #5
    Leadfoot HZ EVIE's Avatar
    Join Date
    Mar 2010
    Location
    Country Vic
    Posts
    159
    Thanks for the help Mook. Keep up the good work!!
    79 HZ XX7 308 Windowless Van . Driving with a big grin. A few little finishing touches required

Thread Information

Users Browsing this Thread

There are currently 15 users browsing this thread. (0 members and 15 guests)

Similar Threads

  1. WB 1-tonner Overlander mockup
    By HK1837 in forum Vehicles or Items Found for Sale
    Replies: 2
    Last Post: 17-06-2013, 12:42 AM
  2. Mooks big day
    By thatotherguy in forum The Lounge
    Replies: 12
    Last Post: 05-12-2012, 09:16 PM
  3. Mooks dash
    By Absinth in forum Interior
    Replies: 14
    Last Post: 10-10-2012, 02:01 AM
  4. Replies: 16
    Last Post: 06-04-2011, 08:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •