The front console mount should look like this.
Consolemounts1.jpg

Not like this one as it is mid-HX to HZ with the cutouts
ConsolebracketHZfront.jpg

The rears HJ-Z looked like this
ConsolebracketHZrear.jpg

On side strips. They were attached with little nipples spot welded along the side. Sometimes you can see evidence on them on the inside as heat marks even if they were grinded off. I think the other tell-tale signes are the screw holes where they were attached at the end in the door jamb and at the tailgate. Unfortunatly I dont have pictures of these yet and I probably should get around to that. :-)

Mauser